High Performance Rolling Mill Cardan Shaft Propeller Shaft

• Customization: Available
• Standard Or Nonstandard: Standard
• Speed: 4000r/M
• Model NO.: SWC-A
• Material: 35CrMo or 45# Steel
• Type: Universal Coupling
• Product Name: Cardan Shaft
• Center Height: 32-120
• Type Design: Length Compensation
• Application: Pump
• Keywords: Universal Joint Shaft
• Transport Package: Wooden Box
• Specification: Steel
• Trademark: ST Cardanshaft
• Origin: China
• Package Size: 50.00cm * 15.00cm * 20.00cm
• Package Gross Weight: 10.000kg

Product Description

Product Description

Data and Sizes of SWC-I Cardan Shaft

TYPE		SWC-I 58	SWC-I 65	SWC-I 75	SWC-I 90	SWC-I 100	SWC-I 120	SWC-I 150	SWC-I 180	SWC-I 200	SWC-I 225
A	L	225	285	335	385	445	500	590	640	775	860
	Lv	35	40	40	45	55	80	80	80	100	120
	m(kg)	2	3	5	6.6	9.5	17	32	40	76	128
B	L	150	175	200	240	260	295	370	430	530	600
	m(kg)	1.7	2.4	3.8	5.7	7.7	13.1	23	28	55	98
C	L	128	156	180	208	220	252	340	348	440	480
	m(kg)	1.3	1.95	3.1	5	7	12.3	22	30	56	96
Tn(N*m)		180	240	500	800	1200	2300	4500	8400	16000	22000
Tf(N*m)		90	120	250	400	600	1150	2250	4200	8000	11000
β(°)		35	35	35	35	35	35	35	25	25	25
D		52	63	72	92	100	112	142	154	187	204
Df		58	65	75	90	100	120	150	180	200	225
D1		47	52	62	74.5	84	101.5	130	155.5	170	196
D2(H9)		30	35	42	47	57	75	90	110	125	140
D3x δ		38*1.5	45*1.5	63.5*2.5	63.5*2.5	89*2.5	89*2.5	120*3	120*3	127*5.5	140*6.5
Lm		32	39	45	52	55	63	85	87	110	120
K		3.5	4.5	5.5	6	8	8	10	12	14	15
t		1.5	1.7	2	2.5	2.5	2.5	3	4	4	5
n		4	4	6	4	6	8	8	8	8	8
d		5.1	6.5	6.5	8.5	8.5	10.5	13	15	17	17
mL(kg)		0.14	0.16	0.38	0.38	0.53	0.53	0.87	0.87	1.65	2.14
Flange bolt	size	M5	M6	M6	M8	M8	M10	M12	M14	M16	M16
	Tighterning torque	7	13	13	32	32	64	110	180	270	270

 

1. Notations:

L = Standard length, or compressed length for designs with length compensation: This denotes the total length that the shaft can achieve under standard conditions or when compressed.
Lv = Length compensation; This specifies the degree to which the shaft can adjust its length to accommodate varying operational requirements.
m = Weight; Indicates the overall weight of the cardan shaft, critical for evaluating load and performance metrics.
Tn = Nominal torque; Defines the typical torque the shaft is designed to handle effectively under normal operating conditions.
Tf = Fatigue torque, i.e., permissible torque as determined according to the fatigue strength; This is the maximum allowable torque based on the shaft's resistance to fatigue under reversing loads.
under reversing loads; This describes the scenario where the shaft can endure the specified fatigue torque repeatedly.
β= Maximum deflection angle; Represents the highest angle at which the shaft can bend without compromising its structural integrity.
δ= Thickness of the tube; Specifies the tube's wall thickness, crucial for determining its durability and strength.
mL = Weight per 100mm tube; This metric helps in assessing the mass distribution over a specific length of the tube.

2. Millimeters are used as measurement units except where noted; All measurements provided are in millimeters unless otherwise specified, ensuring precision and standardization.

3.Please consult us for customizations regarding length, length compensation, and flange connections (DIN or SAE, etc.); We are available to discuss bespoke solutions tailored to your specific requirements for length adjustments and flange types.

Application

Certifications

After Sales Service

 

1. Design Services Our expert design team specializes in cardan shaft engineering, bringing vast experience in product design and development. If you are in need of a new product design or wish to enhance your existing products, we are here to provide exceptional support to meet your objectives.
2. Product ServicesFrom quality raw materials to the final shipment, our meticulous process ensures excellence at every step: Raw materials → Milling Spline → Welding → U-joint Installation → Dynamic Balance → Spray Paint → Testing → Cleaning → Assembly → Packing → Shipping.
3. Samples ProcedureWe can develop samples based on your specific requirements, continually refining them to ensure they perfectly meet your needs.
4. Research & DevelopmentWe diligently research market trends and innovate new models to stay ahead, especially when new cars are introduced to the market.
5. Quality ControlEvery step of our process undergoes rigorous testing by our professional staff, adhering strictly to ISO9001 and TS16949 standards to guarantee superior quality.

FAQ

 

Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer, dedicated to producing a wide array of high-quality couplings.

Q 2: Can you provide OEM services?
A: Absolutely! We offer both OEM & ODM services, catering to all our customers' needs with customized designs in PDF or AI formats.

Q 3: What is your typical delivery time?
A: Generally, our delivery time is between 20-30 days if the items are not in stock. The exact time depends on the order quantity.

Q 4: Do you provide samples? Are they free or paid?
A: Yes, we do provide samples, but they are not free. However, we have a very advantageous pricing policy: when you place a bulk order, the sample cost will be deducted.

Q 5: What is the duration of your warranty?
A: Our warranty period is 12 months under standard conditions.

Q 6: What is the Minimum Order Quantity (MOQ)?
A: Typically, our MOQ is 1 piece.

Q 7: Do you have inspection procedures for your couplings?
A: Yes, we perform 100% self-inspection before packing.

Q 8: May I visit your factory before placing an order?
A: Certainly! We warmly welcome you to visit our factory.

Q 9: What are your payment terms?
A: We accept T/T (Telegraphic Transfer).